PING
PING Glide 2.0 Stealth Wedge (Steel)
Glide 2.0 Stealth
Expected Shipping to begin on 2/8/18
Please Enter Color Code in Notes Section of Checkout
The Glide 2.0 Stealth wedges’ 8620 carbon steel head and precision-milled grooves deliver a softer feel and higher-spinning shots for greater control. The tour-inspired Stealth finish, which yields less glare and makes the head appear smaller, is applied using a QPQ (Quench Polish Quench) process for added durability. Fits the game and the eye of players for whom performance and appearance go hand in hand.
-
Milled Faces And Grooves
These specialized grooves increase the spin rate for more control and precision on full and partial shots and offer exceptional spin consistency from both dry and wet conditions. -
Fitting By Sole Grind
To ensure your wedges match your game, you can be fit for a sole grind based on your attack angle, divot depth, and typical turf conditions: SS Grind, WS Grind, TS Grind, or ES Grind. -
Bottom 1/2 Groove
A precision wheel-cut half groove near the lead edge on the 56⁰, 58⁰ and 60⁰ improves engagement with the ball (specifically low on the face) to significantly increase spin and control from all conditions. -
SS Grind
An all-purpose mid-bounce sole with heel and trail edge relief to create versatility on touch shots around the green. Ideal for moderate attack angles and divots. Fits most golfers. -
WS Grind
Full-sole design that provides turf security for players with a steep angle of attack. The reduced camber and added width prevent digging. -
TS Grind
The TS grind facilitates shot making and precision. Heel relief allows shots to be executed with an open face without fear of the lead edge sitting too high.
ES Grind
PING offers a variety of shaft flexes in steel and graphite to meet your needs and preferences. Selecting the proper shaft flex for your swing will help you get the most distance and accuracy from every shot. Generally, players with faster swing speeds require stiffer shafts to keep the ball trajectory lower, while players with slower swing speeds will require more-flexible shafts to produce a higher ball trajectory.
The choice of steel or graphite shafts is usually based on preferences for weight and/or feel. Players seeking a lighter overall weight and/or a softer feel in their irons may prefer graphite shafts, while players who prefer a standard-weight club with a firmer feel may prefer steel shafts.
We recommend that you get fit for the shaft that allows you to play your best golf. Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, a PING Certified Club Fitter can help you find the shaft that brings consistency to your game.
| SHAFT | FLEX | WEIGHT | LAUNCH ANGLE |
|---|---|---|---|
|
PING AWT 2.0 Wedge
 |
Wedge | 118ggrams | Low Mid |
|
PING CFS Graphite
 |
Soft Regular | 62ggrams | High |
| Regular | 66ggrams | Mid High | |
| Stiff | 78ggrams | Mid |
| CLUB | LOFT | LENGTH | OFFSET | LIE | EFFECTIVE BOUNCE | SWING WEIGHT |
|---|---|---|---|---|---|---|
| 46/SS | 46.0° | 35 1/2”inches | 0.05”inches | 64.1° | 12.0° | D2 |
| 50/SS | 50.0° | 35 1/2”inches | 0.04”inches | 64.1° | 12.0° | D2 |
| 52/SS | 52.0° | 35 1/2”inches | 0.04”inches | 64.1° | 12.0° | D2 |
| 54/SS | 54.0° | 35 1/4”inches | 0.03”inches | 64.4° | 12.0° | D3 |
| 54/ES | 54.0° | 35 1/4”inches | 0.06”inches | 64.4° | 8.0° | D3 |
| 54/WS | 54.0° | 35 1/4”inches | 0.04”inches | 64.4° | 14.0° | D3 |
| 56/SS | 56.0° | 35 1/4”inches | 0.03”inches | 64.4° | 12.0° | D3 |
| 56/WS | 56.0° | 35 1/4”inches | 0.04”inches | 64.4° | 14.0° | D3 |
| 56/ES | 56.0° | 35 1/4”inches | 0.06”inches | 64.4° | 8.0° | D3 |
| 58/SS | 58.0° | 35”inches | 0.03”inches | 64.6° | 10.0° | D4 |
| 58/TS | 58.0° | 35”inches | 0.03”inches | 64.6° | 6.0° | D4 |
| 58/WS | 58.0° | 35”inches | 0.03”inches | 64.6° | 14.0° | D4 |
| 58/ES | 58.0° | 35”inches | 0.06”inches | 64.6° | 8.0° | D4 |
| 60/SS | 60.0° | 35”inches | 0.03”inches | 64.6° | 10.0° | D4 |
| 60/TS | 60.0° | 35”inches | 0.03”inches | 64.6° | 6.0° | D4 |
| 60/WS | 60.0° | 35”inches | 0.03”inches | 64.6° | 14.0° | D4 |
| 60/ES | 60.0° | 35”inches | 0.06”inches | 64.6° | 8.0° | D4 |
NOTES
- These are design specifications that may vary due to manufacturing tolerances.
- Lie angle based on Black Color Code at standard length
- Standard swing weights for graphite-shafted clubs are 1-2 points lighter than steel shafts (as shown above).
- Achievable swingweights depend on shaft and grip combinations.
